MILLERS Classic Running in Oil 30
Availability: In Stock
Ex Tax: £0.00
MILLERS Classic Running in Oil 30
Unit of Sale: 1 x 5ltr
CLASSIC RUNNING IN OIL 30
Maintenance & Preparation (Mineral Running in Oil)
Performance Profile
- API: SE, CC
Description
SAE 30 running in oil for classic engines. Highest quality solvent refined mineral base stocks treated with specially designed additive system.
Application
Use for initial running in of re-built engines. Formulated for running in on the road. Can be used for test bed running. Run engine at peak torque to ensure maximum bedding-in of piston rings. Drain and refill with the Millers Classic lubricant most suitable for the engine. Suitable for limited road use (500 to 1,000 miles maximum) after which it should be replaced with the appropriate Millers Classic Engine Oil.
User Benefits
- High quality mineral oil formulated to solve the problems experienced when reconditioned engines do not bed-in.
- Provides full protection to highly stressed valve gear and associated components whilst allowing piston rings to bed in against the bore.
- Good running in will optimise the performance and fuel efficiency of a reconditioned engine.
- Very low leak down (4%) obtained after thorough running in process.
Typical Characteristics
| SAE Viscosity | 30 |
| Specific Gravity (at 15°C) | 0.887 |
| Kinematic Viscosity (at 100°C, cSt) | 11.9 |
| Kinematic Viscosity (at 40°C, cSt) | 104 |
| Viscosity Index | 103 |
| Pour Point (°C) | -15 |
| Flash Point (°C) | >200 |
Health & Safety
Data Sheet 7932 applies to this product.
If you require any further information about CLASSIC RUNNING IN OIL 30 or its use please contact the Millers Oils Technical Department
Collect in Store available
Please note: These products are NOT available for export outside of the Mainland UK
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: