MILLERS CFS Fully-Synthetic 10w40 5ltr
Availability: In Stock
Ex Tax: £35.59
MILLERS CFS Fully-Synthetic 10w40 5ltr
Unit of Sale: 1 x 5ltr
CFS 10w40 Engine Oil, Fully Synthetic Oil
Fully Synthetic Triple Ester Formulation. For use in competition or modified engines.
Performance Profile
• Manufactured to far exceed the requirements of: API: SL, CF and ACEA: A3/ B4
• For fast road use or track days in engines where a 5w40 is normally specified.
• Suitable for operating at 125°C with a peak temperatures up to 150°C.
Description
Competition fully synthetic petrol/diesel engine oil. Formulated with 100% synthetic base fluids, including a synergistic blend of three esters combined with the latest additive technology for maximum performance. CFS 10w40 is suitable for smaller capacity race and rally engines and turbocharged engines for fast road and track days. This is also a high performance alternative to standard oils where the manufacturer specifies this viscosity.
Application
Use for competition or modified engines where maximum performance is required.
User Benefits
- Provides a 26% reduction in friction plus a reduction in wear compared to a standard engine oil.
- Fully synthetic oils provide many outstanding performance benefits over conventional mineral oil.
- By utilising both polyalphaolefins (PAO) and ester synthetics specially selected to minimise the amount of polymer used, the lubricant film provided is more resistant to 'shear' and viscosity loss in high stress areas.
Full synthetic oil provides:
- Load carrying capacity many times that of mineral oil.
- High film strength for ultimate protection.
- Outstanding cold flow properties for reduced wear at start up excellent thermal stability and oxidation resistance.
- The synergistic blend of three esters gives improved lubricity, reducing friction and enhancing the oils performance.
- CFS 10w40 additive technology is formulated to protect high revving competition engines from modern 16-valve twin OHC to older pushrod OHV engines.
Typical Characteristics
| SAE Viscosity Grade |
10w40 |
| Specific Gravity @ 15°C | 0.879 |
| Kinematic Viscosity @ 100°C | 15.5cSt |
| Kinematic Viscosity @ 40°C |
105.3cSt |
| Viscosity Index | 156 |
| Pour Point °C | <-33 |
| Flash Point °C | >243 |
| Cold Crank Viscosity @ -25°C | 7,000cP Maximum |
| TBN mg KOH/gm | 10.0 |
Heath & Safety
Data Sheet 7954 applies to this product
If you require any further information about CFS 10w40 or its use please contact the Millers Oils Technical Department
Collect in Store available
Please note: These products are NOT available for export outside of the Mainland UK
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: